<font id="9bmwb"><tbody id="9bmwb"><var id="9bmwb"></var></tbody></font>
  • <wbr id="9bmwb"><meter id="9bmwb"></meter></wbr>
    <u id="9bmwb"><sub id="9bmwb"></sub></u>
  • <input id="9bmwb"></input>
    <input id="9bmwb"></input>
    1. <wbr id="9bmwb"><big id="9bmwb"><p id="9bmwb"></p></big></wbr>


      EngLish | ÖÐÎÄ°æ  
      Drilling Mud Purification System
      LW Drilling Mud Decanter Centrifuge
      LW Large Displacement Decanter Centrifuge
      GLW High-Speed Centrifuge
      GLW-BP400 High-Speed Variable Frequency Centrifuge
      Sand Pump
      Vertical Sand Pump
      Shear Pump
      NJ Mud Agitator
      NJC Gear Type Mud Agitator
      Submersible Slurry Pump
      SB100¡Á80 Mud Pump
      Metering Pump
      Desilter
      Desander
      Vacuum Degasser
      Mud Cleaner
      Mud Gas Sepatator
      Jet mixing device
      Flare Ignition Device
      Mud Gun
      Shale Shaker
      Venturi Hopper
       
        The current position£ºHome > LW Large Displacement Decanter Centrifuge
      Last         Next
      ¡¡¡¡¡¡Product description
      Overview:

      The centrifuge we produce if special equipment for separating the solid from the liquid. The machine has suitability for different well drilling procedure and high process capacity. It can separate out the ultra micro harmful solid-state grains in the drilling mud. At the same time, the transporter blade in this machine is inlaid with hard alloy block that elongates its service life considerably.

      Installation, use and maintenance:

      1, Centrifuges to be installed on top of the new entrance to the 3rd tank away from the drilling pump, can also be arranged according to the actual situation.
      2, Frequently check the fasteners are tightened, and lubrication of lubricating parts.
      3, The top-long centrifuge should be cleaned rollers and conveyor to have a confirmation no jamming before boot.
      4, Machine operation should idling for 10-15 minutes, confirm centrifuge normal operation, then open the pump for a small to large amount of slurry, adjusted to a suitable date.
      5, if the drilling fluid viscosity is too high, should be appropriately adding dilution water, to reduce viscosity, to accelerate the solid phase precipitation speed, improve the processing capability of the centrifuge.

      Technical parameters:

      Model

      Bowl Speed
      r/min

      Treating capacity
      m³/h

      Separation point
      µm

      Main motor
      (kw)

      Back motor power
      (kw)

      LW600-NY

      1800

      80

      10

      45

      11

      LW650-NY

      1800

      90

      10

      55

      15

      Hits£º7168  Edttime£º2012/11/22 ¡¾Print this page¡¿ ¡¾Close¡¿
      Copyright @ Dongying Yongji Petroleum Machinery Company Limited
      五月天AV免费观看_国产专区国产av一区_精品亚洲成a人在线_亚洲+日韩+国产+中文有码